 |
| L-1011 Trainer - Pre-Installation Move (Overhead and SO Station) |
Jay and I worked on moving simulator elements from the storage room to the museum today. We moved quite a few elements including the Flight Engineers station (aka. SO Station) as well as the Overhead Panel as well as the Overhead Breaker Panels.
A number of the panels on the L-1011 procedure trainer are non-functional simulated panels and instruments. The overhead and first officer station has mostly functional elements, however, a few of them are non-functional. Below is an illustration of which elements of the overhead panel are non-functional. These non-functional panels will be replaced with panels from an actual L-1011 so that in the end-state the entire overhead and so-station will be fully functional.
 |
| L-1011 Overhead Panel for the Simulator at at the NMCA |
Below is an image illustrating the non-functional panels boxed in yellow:
 |
| L-1011 Trainer at the NMCA - Non-functional panels. |
Most of the non-functional panels above are elements of the navigation system, such as then INS as well as the HF radios. Both we already have and will be easily replaced with functional units. Lets take the same look at the first officer station. Here we will see that only a few of all elements are not functional:
 |
| L-1011 Flight Engineer Station |
Below is an image illustrating the non-functional elements (boxed in yellow) of the L-1011 trainer that will soon be replaced with functional units from an actual L-1011.
 |
| L-1011 Trainer at the NMCA - SO Station Non-Functional Elements |
No comments:
Post a Comment